Skip to content

Enterprise Perimeter Intelligence

AirezSense™ FoRiTurning Vibration into Visibility.

A patented fiber-optic perimeter intelligence system that transforms micro-vibrations into real-time situational awareness through the AIREZ Physical Intelligence Layer.

ThermalRadarCamerasLiDARAI ModelsGSOC

What is AirezSense?

The ground, the fence and the pipeline become the sensor.

AirezSense FoRi is a patented fiber-optic sensing platform that detects vibrations, footsteps, vehicles, digging, cutting, and other physical disturbances across critical infrastructure.

Integrated with AIREZ, these signals become contextual intelligence rather than isolated alarms.

How it works

Four stages between a disturbance and a decision.

Each stage narrows uncertainty. What begins as a micro-vibration in a strand of glass arrives in the operations centre as an understood situation with a recommended response.

  1. 01

    Fiber Optic Sensing

    A single fiber run becomes thousands of continuous virtual sensors, reading the interference pattern created by any disturbance along its length.

  2. 02

    Edge Processing

    Signals are classified locally, within metres and milliseconds, so bandwidth carries conclusions instead of raw waveform.

  3. 03

    AIREZ Sensor Fusion

    The vibration event is corroborated against thermal, radar, camera, LiDAR and access-control state to resolve what actually happened.

  4. 04

    Situational Awareness

    The GSOC receives one located, scored, explainable event — with the response already recommended and the evidence attached.

Built for critical infrastructure

Where a missed disturbance becomes a national-scale consequence.

The same fiber, the same platform, tuned per environment. Hover any environment to see how the sensing field re-focuses around it.

  • Defense

    Covert detection fields where visible infrastructure is a liability.

  • Military Bases

    Layered perimeter awareness across large, partially unfenced installations.

  • Border Security

    Wide corridors monitored without revealing where detection occurs.

  • Pipelines

    Right-of-way protection against digging, tapping and third-party strike.

  • Utilities

    Substation and generation perimeters with no RF footprint.

  • Airports

    Airside fence lines, tunnels and service corridors under continuous watch.

  • Ports

    Quays, gates and container yards where the perimeter is always in motion.

  • Rail

    Track intrusion, cable theft and structural disturbance across long routes.

  • Data Centers

    Fence, conduit and structural integrity monitored down to the metre.

  • Correctional Facilities

    Climb, cut and tunnel activity classified before it becomes an escape.

  • Corporate Campuses

    Discreet perimeter awareness that never looks like a security cordon.

  • Remote Infrastructure

    Unmanned assets that report themselves, on minimal bandwidth.

Sensor fusion

One sensor inside a much larger intelligence.

AirezSense is never asked to be certain on its own. Select any node to see the relationship AIREZ uses to turn a vibration into a conclusion.

AirezSense FoRi

Select a node

AirezSense is one sensor inside a much larger intelligence. Select any node to see how AIREZ corroborates a vibration into a conclusion.

What can it detect?

Twelve classes of physical disturbance, continuously.

Every detection is located along the fiber run, timestamped, classified and scored — not reported as a zone-level alarm.

  • Footsteps

    Individual gait signatures, including deliberate slow approach.

  • Vehicle Movement

    Class, direction and speed along or across the sensing line.

  • Digging

    Manual and mechanical excavation near buried assets.

  • Tunnel Activity

    Subsurface boring and spoil movement beneath the perimeter.

  • Fence Climbing

    Load and flex signatures distinct from wind or animal contact.

  • Fence Cutting

    High-frequency cut events isolated to the exact span.

  • Mechanical Failure

    Bearing, pump and structural anomalies before they cascade.

  • Explosions

    Blast events located instantly across the full run.

  • Ground Vibrations

    Seismic and construction activity separated from threat activity.

  • Tampering

    Interference with the fiber, enclosures or connected infrastructure.

  • Pipeline Disturbances

    Third-party strike, tapping and unauthorised excavation.

  • Perimeter Breaches

    Confirmed crossings, corroborated across the sensing stack.

Why fiber?

A perimeter that cannot be seen, jammed or mapped.

Conventional perimeter sensing announces itself. Fiber is passive glass in the ground — there is nothing to detect, defeat or maintain in the field.

Traditional Sensors

AirezSense FoRi

Powered devices at every point of detection

Passive glass; sensing electronics live in one secured cabinet

Emits, and can be located by what it emits

No RF emissions along the entire sensing run

Susceptible to electrical and industrial interference

Immune to EMI, EMF and lightning-induced noise

Visible cameras, poles and enclosures reveal coverage

Undetectable — an adversary cannot map what they cannot see

Zone by zone, device by device

Long-distance continuous sensing over tens of kilometres

Overt infrastructure requiring visible build-out

Covert deployment in existing conduit, fence fabric or trench

Field devices to power, clean, calibrate and replace

Low maintenance; no field electronics to service

Linear cost per additional point of detection

Highly scalable — extend the run, extend the intelligence

AI-driven classification

It does not simply detect. It understands.

Every disturbance is classified against known signature classes, corroborated across the sensing stack, then scored and paired with a recommended response.

Threat Score

Hover a classification to see how the score and response change.

Recommended Response

  1. 01Suppress — explained by environment
  2. 02Monitor — corroboration pending
  3. 03Cue camera and verify
  4. 04Dispatch and escalate to a person in authority

Enterprise security

Built to pass the review before it passes the perimeter.

  • Encrypted Communications

    In transit and at rest, across every hop from edge to GSOC.

  • Edge Processing

    Classification happens on site; raw signal never has to leave it.

  • Role-Based Access

    Scoped visibility per agency, per site, per role.

  • Audit Logs

    Every conclusion, action and override is attributable and retained.

  • Government Ready

    Architected for federal and defense deployment requirements.

  • Scalable Architecture

    One site or a national network, on the same platform.

  • Low Bandwidth

    Conclusions on the wire, not waveform — viable on austere links.

  • Real-Time Analytics

    Sub-second location, classification and operator presentation.

Commercial deployment

Available as infrastructure, intelligence, or both.

AirezSense is deployed as a complete programme or as a layer inside an existing security architecture.

  • Fiber deployments

    New runs, or existing dark fiber and conduit brought into service as a sensing field.

  • Edge processors

    Interrogator and edge AI hardware sized to the run and the environment.

  • AIREZ subscriptions

    The Physical Intelligence Layer, fusion, orchestration and continuous model improvement.

  • GSOC monitoring

    Managed operations centre coverage with escalation into your chain of command.

  • Infrastructure protection

    Pipeline, utility, rail and port programmes delivered with integration partners.

  • Government programs

    Federal, defense and border deployments with the required governance posture.

  • Enterprise security deployments

    Campus and data-centre perimeters integrated with existing VMS and access control.

Future roadmap

From a perimeter to a continuously aware landscape.

Each horizon extends the same sensing physics into a larger operating picture. Nothing on this path requires replacing what is deployed today.

  1. Offshore Monitoring

    Subsea runs protecting cables, platforms and coastal approaches.

  2. Subsurface Detection

    Deeper tunnel and void discrimination beneath hardened perimeters.

  3. AI Soil Modeling

    Ground composition learned per site to sharpen every classification on it.

  4. Satellite Integration

    Overhead change detection corroborating ground-level disturbance.

  5. Autonomous Response

    Bounded robotic verification dispatched directly from a scored event.

  6. City-Scale Perimeters

    Municipal fiber turned into civic-scale physical awareness.

  7. Critical Infrastructure Networks

    Cross-operator intelligence sharing without shared surveillance.

Patent protection

Protected Innovation

AirezSense is built upon multiple issued U.S. patents that protect core sensing technologies and reinforce AIREZ's long-term commitment to innovation.

  • Issued U.S. patent

    US 12,018,941 B2

    Fiber-optic interferometric sensing

  • Issued U.S. patent

    US 11,913,785 B2

    Disturbance localization and classification

  • Issued U.S. patent

    US 12,038,276 B2

    Distributed sensing system architecture

Related resources

Take the detail with you.

Briefs, guides and analyses covering this solution and the environments it operates in.

Ready to Protect What Matters Most?

Learn how AirezSense and the AIREZ Physical Intelligence Layer can transform existing infrastructure into intelligent, continuously aware environments.